Handling a Water Heater Breakdown: Effective Tips

Schedule A Service Call

Just how do you actually feel in relation to What Would Cause My Electric Water Heater to Stop Working??


Hot Water Heater Repair
Many modern homes use an electric water heater for their heating unit, due to its comfort and convenience of use. Nonetheless, just like any other electrical devices, issues might occur with its usage, all of a sudden. It can be really discouraging to wake up to a cool shower rather than a hot one or having your bathroom with water that isn't warm enough or perhaps as well warm. Whatever the case might be, water heater issues can be fairly nerve-racking. The good news is, we have actually made a checklist of feasible services to your water heater problems. There are a variety of aspects that could cause many of these troubles, maybe a problem with the power supply, the electrical heating element, or the thermostat. Before doing anything, guarantee you turn off the main power supply for safety and security. Whatever the issue is, getting it fixed should not pose excessive of an issue if you adhere to these steps:

Inspect Your Power Supply:


As standard as this might appear, it is really necessary. Without ample power, your water heater will not function. So the first thing to do when your water all of a sudden retires is to verify that it isn't a power issue. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the concern, just transform it on and off again. Replace any broken or worn-out fuse. Test the home appliance with power after these changes to see if it's currently functioning.

Examine the Heating Element in the Water Heater:


If it's not a power trouble, then try having a look at your burner if it is still functioning. Test each of your burner to be sure the problem isn't with any one of them. If any of them is malfunctioning, replace that part and then examine whether the hot water is back on.

Inspect Your Thermostat:


If your hot water heater still isn't functioning or the water appearing isn't warm sufficient, you may require to examine the temperature settings on your top thermostat. Ensure the breaker is turned off before doing anything. Open the gain access to panel and also press the red button for temperature level reset above the thermostat. This must assist heat up the water. Transform the circuit breaker back on and inspect if the trouble has been solved.

Call A Professional:


If after changing all faulty components and also resetting your temperature level, the hot water heater still isn't working, you might require to contact an expert plumber for a professional viewpoint. The issue with your heating system could be that the cold and hot taps have actually been switched over or it might be undersized for the quantity of hot water needed in your home. Whatever the case may be, an expert plumber would assist solve the trouble.

Final thought


Water heater problems are not always significant. Many of them are due to small concerns like a blown fuse or worn-out heating element. Changing the damaged parts must suffice. Nonetheless, if you are still unable to address the problem, give a call to your local plumber to find to get it dealt with.

Common Reasons Why Your Hot Water Heater Isn’t Working


Water Gets Too Hot


Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.



FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.


Water Doesn’t Get Hot


This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).



FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.


Leaking Water Heater


A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.



FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.


Noisy Water Heater


Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.



FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.


Pilot Light Keeps Going Out


Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.



FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.


Water Smells Bad


The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.



FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.


Water Looks Brown Or Rusted


The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)



FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/


No Hot Water — Water Heater Repair

I have been very interested by How to Troubleshoot and Repair an Electric Water Heater and I am assuming you appreciated the new entry. Loved our content? Please share it. Help someone else check it out. Thank you for your time. Don't forget to pay a visit to our blog back soon.


Need fast action?

Leave a Reply

Your email address will not be published. Required fields are marked *